How to flash / reinstall Sony Experia Z5, make your Sony Experia Z5 smartphone affected by application crashes, viruses,bootloop, hacked, cracked, ads on Sony Experia Z5 difficult to dispose of and other software glitches this is one way to overcome it, namely degan in flash or reinstall, but please rethink if you want to flash/ reinstall Sony Experia Z5 yes, because this will delete(format) the internal memory in your Sony Experia Z5.
If you have done a Factory Reset but still failed then there is no harm if you try to do flashing. Before flashing make sure your smartphone battery ranges from 50% and above so as not to fail in the middle of the flashing process. If you are sure, you can follow the way below...
Necessary materials for Flash Sony Xperia Z5 (E6653) and Xperia Z5 Dual (E6683)
Download USB Driver all series Xperia
Download Flashtool version 0.9.18.6
Download Firmware Sony Xperia Z5 (E6653) 32.3.A.2.33 (Global)
Download Firmware Sony Xperia Z5 Dual (E6683) 32.4.A.0.160 (Indonesia)
If you want to choose your own firmware you can look for it in (Sony Xperia Firmware collection)
Make sure all the ingredients are prepared, after everything is collected please note the following step by step process so that the process runs with next.
Flashing steps of Sony Xperia Z5 (E6653) and Xperia Z5 Dual (E6683)
- Install USB Driver that you have downloaded above (how to Install USB Driver Sony Xperia)
- Install Flashtool and make sure it is installed correctly.
- Extract the Firmware file you have downloaded and move it to a folder. Example: C:\Users\asdfnn\.flashTool \ firmware
- Run as Administrator (klink right on the icon then click run as administrator) Flashtool that you have downloaded then click the symbol “flash” or “lightning” and continue by selecting “Flashmode”.
- click "OK", then proceed to select the firmware that you have previously moved to the firmware folder. The firmware File has an extension .ftf and continue to click "Flash" and wait a few moments until the smartphone logo comes out.
- now turn off the smartphone that will be in the flash, Press and hold “Volume (-)” and continue to connect your smartphone with a computer device that will be used to flash / reinstall.
- make sure the smartphone is connected to your computer device because if it has been installed the phone will automatically enter the flashing process and this process takes approximately 10 minutes (depending on computer specifications)
- Make sure the process is complete.
- Congratulations smartphone you successfully flash / reinstall, but you have to be a little patient again when the process of updating your phone because this process is also a little time consuming but can be sure your flashing process goes well.
Done. Good Luck...
Tags
Tutorial