Hi friends, in this article I will share with you about how to flash or reinstall "OPPO Neo 3 R831K" which is commonly used to solve bootloop problems or software damage ,hang or virus that appears on your smartphone. Ok to the point at length right away this is the way :
"Recommended only R831K series"
Make practice definitely need materials, here it is please Download!
1. USB VCOM DRIVERS
2. SPFlashtool V 5.1352.01
3. Firmware OPPO Neo 3 R831K
Okay so here's how it works :
- Extract USB VCOM Driver then install in PC / laptop
- Also extract SPFlashtool Versi5.1352.01 and Fimware Oppo Neo 3 R831K that have been downloaded
- Next, open the spflashtool extract folder and run flash_tool.exe by right click Select Run as administrator
- After the Flashtool is open click scatter-loading then find the MT6572_Android_scatter file in the fimware Oppo YoYo r2001 extract folder, select the file then click Open and wait a moment until the perfect fimware is loaded into the sp flashtool tools
- Turn off Oppo Neo 3 R831K (to make sure Oppo Neo 3 R831K is off, first shut down a few seconds)
- Now connect to the pc using a USB cable while pressing the Volume Up button and the flashing process automatically runs, wait for it to finish (if the flashing process does not run, please connect the Oppo Neo 3 R831K without using batteries)
- When the flashing process Oppo Neo R831K is completed will come out ceklis green circle as in the picture below
- Next remove the Oppo Neo 3 R831K from the PC and turn it on (after flashing, usually the first boot is a bit long)
- Oppo Neo 3 r831k flashing process completed
That was the article about how to overcome Oppo Neo r831k bootloop with flash reset, which is useful to recover problems on the Android system Oppo Neo 3 r831k such as bootloop, sytem application error, system application stop, hang, slow and also various other problems.
Tags
Oppo